Zhengzhou Jiutian is currently the most professional and most authoritative enterprise engaged in the research and development of drying equipment in China. The mineral slag dryer is meticulously researched and developed for drying slag, slurry, and other materials. After more than 20 years of drying practice and researches, it has been continuously improved. With its advanced technology, high efficiency, low energy consumption, stable operation, and easy operation and maintenance, safety and environmental protection, praised by users, more than 100 sets of drying equipment are perfectly operating in China and around the world. This type of equipment is widely used in cement, mining, building materials, chemicals, food, metallurgy, chemical, fertilizer production, slag, clay, and other industries. The equipment can be customized according to the type of material, depth of precipitation and user needs to meet the individual needs of each user.

Mineral slag dryer is mainly composed of hot air furnace, belt conveyor, rotary drum dryer, belt conveyor, induced draught fan, cyclone dust collector, bag dust collector (or wet dust collector) and operation control system. The equipment adopts the fair current (or countercurrent) drying process. 

Working principle: After entering the drying drum, the wet materials are spitting into the following working areas: First, the material guiding zone. The mineral slag enters this zone and contacts with high-temperature hot air to quickly evaporate water. Under the circumstance of the large lead angle guide plate, it is transferred to the next work area; the second is the copy board area. The mineral slag is the lifting flight drop and picks up in this area to form the material curtain state. At this time, the material in full contact with the hot blast. The moisture in the material slag is quickly evaporated and stripped into water vapor. The water vapor drawn away immediately by the induced draft fan to achieve the purpose of drying the mineral slag; the mineral slag is dried in this area to moisture content of less than 5% (or lower) In the loose state, after the heat exchange, the material reaches the required moisture state and enters the final discharge area. The third is the discharge area. The drum does not have a copy board in this area. The material is rolling in the area to the discharge port, completing the entire drying process.